Digital nuna thermostat tanki

1, samfurin gabatarwa:

Ana amfani da tankin ruwa mai zafi sosai don bushewa, daidaitawa, distillation, sinadarai da kayayyakin halitta, kuma ana iya amfani da tankin ruwa mai zafi da sauran gwaje-gwajen zafi. Yana da kayan aiki masu mahimmanci don ilimin halitta, kwayoyin halitta, ƙwayoyin cuta, kifin ruwa, kare muhalli, likita, tsaftacewa, dakunan gwaje-gwaje na sinadarai, dakunan bincike, ilimin kimiyya.

Babban fasali:

1) Studio ruwa tanki zaɓi kayan bakin karfe, gidan ya yi amfani da electrostatic spraying tsari, da m lalata juriya kaddarorin.

2) madaidaicin kula da zafin jiki, nuni na dijital, samfurin gani na dijital, sarrafa zafin jiki ta atomatik.

3) Easy aiki, amfani da aminci.

4) tare da cakuda aiki, sa zafin jiki more daidai.

II. fasaha nuna alama:

3, amfani da kulawa:

1, allura adadin ruwa mai tsabta a cikin tankin ruwa na studio, a sanya kwantena.

2, haɗin wutar lantarki; Saitunan zafin jiki daidai da sashi na 3, idan kana buƙatar aikin haɗuwa, danna maɓallin haɗuwa kai tsaye a kan panel na aiki.

3-1: Da farko walƙiya nuna dfs bayan samar da wutar lantarki, bayan nuna ranar, don gano ko dijital bututun pen drawing ya rasa.

3-2: *** Latsa maɓallin saiti sau biyu, fitilar SL mai haske, shiga yanayin saitin zafin jiki, latsa maɓallin daidaitawa sama, daidaitawa sama 0.5 ℃, latsa maɓallin daidaitawa ƙasa, daidaitawa ƙasa 0.1 ℃.

3-3: Latsa maɓallin saiti na biyu, nuna d na farko, shiga saiti a gaba don sarrafa ƙimar zafin jiki, za a iya daidaitawa a 0-5 ℃. (Misali: saita zafin jiki zuwa 50 ℃, idan zafin jiki 0.5 ℃, don hana zafin jiki daidaita d zuwa 0.5, don haka dumama zuwa 49.5 ℃ ya cire dumama; Har ila yau, idan an saita zafin jiki zuwa 90 ° C, idan zafin jiki ya wuce digiri 1, za a daidaita d zuwa 1, *** bayan dumama zuwa 89 ° C za a kashe shi).

3-4: Na uku latsa saitin maɓallin, na farko nuna C ko -, shiga zafin jiki m daidaitawa, za a iya daidaitawa a -9.8 -(+9.9 ℃). (Misali: Lokacin da zafin jiki na nuni ya kasance ƙananan 0.5 ° C fiye da ainihin zafin jiki, daidaita C zuwa + 0.5 ° C don haka ya dace da nuni; Lokacin da zafin jiki na nuni ya fi 0.5 ° C fiye da ainihin zafin jiki, daidaita C zuwa -0.5 ° C don haka ya dace da nuni).

3-5: na huɗu latsa saiti key za a iya dawo zuwa ma'auni jihar, idan akwai saiti darajar ne ta atomatik sarrafawa, a karshen saiti darajar saiti, idan ba latsa saiti key dawo zuwa ma'auni jihar, sarrafa zafin jiki mita ta atomatik tsalle bayan 5 seconds da kuma aiki.

3-6: Long latsa saitin maɓallin 5-8 seconds, za a iya ta atomatik sake saitin zafin jiki darajar dawo zuwa 00.0 ℃, *** kafin saitin zafin jiki, idan saitin zafin jiki darajar ba daidai ba ne, ya kamata a fara sake saitin bayan amfani da shi.

3-7: Idan shi ne high daidaito sarrafa zafin jiki, 3-5 da 3-6 ba bukatar aiki; Har ila yau, danna maɓallin saiti sau ɗaya, a saman layin nuna -d, umarnin shiga saiti *** Low dumama iko factor, farawa ta atomatik ne 3, za a iya daidaitawa a 1-8. (Ana ba da shawarar a saita shi a kusan 7-8 a cikin yanayin rabin rufewa; Cikakken rufewa yana kusan 1-2)

3-8: Aiki ya kammala, latsa saitin maɓallin 5-8 seconds, zafin jiki sarrafawa tsarin zai ta atomatik sake saita, saitin zafin jiki dawo zuwa 00.0 ℃ kashe dumama ikon. (Idan aikin ya kammala, ba tsawon latsa saiti key sake saita, kai tsaye kashe wutar lantarki, to sake buɗe bayan sarrafa zafin jiki tsarin zai rikodin asali saitunan).

3-9: Idan ruwan wanka ba a yi amfani da shi ba na dogon lokaci, ya kamata a cire ruwa daga tankin ruwa na ɗakin karatu, a tsabtace shi da kayan lafiya kuma a bushe shi.

4, kammala aiki, sanya zafin jiki sarrafa knob kamar yadda *** karamin darajar, yanke wutar lantarki.

5, hana amfani da dumama a cikin tanki mara ruwa.

A lokaci-lokaci dubawa da kulawa na dumama bututun da studio haɗi wuri don hana leakage, leakage haifar da rashin aminci.