A. Bayani na samfurin:

Masu auna zafi na lantarki sun ƙunshi rukunin auna kwarara, rukunin lissafin zafi da na'urar auna zafi mai daidaito (PT1000). Electromagnetic Thermometer amfani da Faraday electromagnetic induction ka'idar auna kwarara, haɗuwa da biyan bayar da ruwa zazzabi siginar na'urori masu auna jiki, zai iya lissafi, tara, adana da kuma nuna zafi sha ko saki a cikin zafi musayar zagaye. Electromagnetic zafi mita gudu, makamashi lissafi na CPU da samfurin kayan aiki duk amfani da kasa da kasa ci gaba guda chip, da ƙwaƙwalwar ajiya iya girma, kayan aiki high aminci, zafi lissafi zai iya gaske cimma enthalpy darajar lissafi, cimma high daidaito. Cikakken saitin nau'i-nau'i na zafin jiki yana amfani da Platinum juriya Pt1000, kuskuren nau'i-nau'i ≤0.1 ℃. Daidaitaccen matakin mitar zafi na lantarki ya kai matakin 2.

2. aiki ka'ida:

Electromagnetic thermometer lissafa da kuma nuna zafi da aka saki ko sha da tsarin bisa ga kwarara siginar da kwarara firikwensin a cikin tsarin da kuma m zazzabi firikwensin da aka gano, da kuma lokacin da ruwa ya gudana. Yana nuna zafi a cikin tarin nau'i, a cikin kWh, *** babban nuni na 8-bit.

Samfurin lissafi na lissafi shine:

formula: -- sakin zafi, kJ；

m - ingancin ruwa mai ɗaukar zafi a cikin mitar zafi, kg/s；

- m darajar enthalpy na zafin jiki mai ɗaukar zafi daidai da zafin jiki na fitarwa a cikin madaidaiciyar musayar zafi, kJ/kg；

t - lokaci, s

3. aikace-aikace:

Masu auna zafi na lantarki shine ma'auni wanda ke auna zafi da ruwan zafi ya saki a cikin tsarin canjin zafi. Yana amfani da high daidaito, high aminci electromagnetic kwarara ma'auni a matsayin kwarara ma'auni, amfani da high daidaito, high kwanciyar hankali platinum zafi juriya don zafi ma'auni, sa wannan zafi makamashi ma'auni da sosai m ma'auni aiki. Ana iya amfani da shi sosai a kan ma'auni na zafi na tsakiyar dumama, dumama, iska mai sanyaya da sauransu.

4. Main fasali:

1, babban allon LCD nuna daban-daban sigogi, kuma za a iya samar da a wurin nuna kayan aiki bisa ga bukatun mai amfani.

2, cikakken CMOS micro ikon kewaye zane, tsarin ikon amfani da low.

3, tare da sadarwa module, za a iya aiwatar da nesa sadarwa.

4, tare da bawul sarrafawa aiki, za a iya sarrafa bawul canzawa daga nesa, sauki dukiya caji management.

5, auna injin babu motsi sassa, ba taɓa lalacewa, ma'auni daidaito ba tasiri da amfani da sake zagayowar.

6, za a iya haɗi tare da injin dakin famfo ko gidan baƙi, a lokacin da babu sanyaya ko dumama, dakatar da ma'auni, kauce wa tsarin ba a yi amfani da shi ba, saboda ƙananan kwarara na bututun da ƙananan bambancin zafin jiki ya kawo kuskuren ma'auni na makamashi.

7, overall zane, sauki shigarwa, aminci da aminci.

8, biyu amfani da dumama da sanyaya.

Five, lantarki magnetic zafi mita fasaha sigogi:

fasaha sigogi na Converter:

1, wutar lantarki: 220V AC (110VAC ~ 245VAC), 24VDC;

2, ikon amfani: ≤20W (tallafawa ikon amfani);

3, daidaito matakin: matakin 1 ko matakin 2 (tallafawa daidaito);

4, kariya matakin: IP65;

5, yanayin zafin jiki: Class A;

6, zafin jiki ƙuduri: 0.01 ℃;

7, zaɓi zazzabi auna kewayon: -30 ℃ ~ 180 ℃;

8, zafin jiki bambancin ma'auni kewayon: 1 ℃ ~ 90 ℃;

9, kwarara zui babban karatu (m3): 99999999 (goma digits);

10, zafi zui babban karatu (Mwh): 99999999 (goma digits);

11, zafi raka'a: kJ, MJ, GJ, kwh, Mwh zaɓi;

12, analog fitarwa: 4 ~ 20mA DC / 600 load juriya (za a iya canzawa tsakanin zafi da kwarara sigogi);

13, pulse fitarwa: zui mita 5000Hz, pulse width 0.1ms ~ 999.9ms (za a iya canzawa tsakanin zafi da kwarara sigogi);

Sadarwa: RS-485 (RS-232, M-BUS, HART, da sauransu).

Sensor fasaha sigogi:

1. Nominal diamita: DN50 ~ DN1400mm;

2, nominal matsin lamba: 0.6MPa ~ 4MPa;

3, liner kayan: high zafi roba juriya, PTFE、PFA、F46；

4, lantarki kayan: dauke da bakin karfe na molybdenum, Hastellate B, Hastellate C, titanium, platinum / iridium, tantalum;

5. Tsarin nau'i: nau'i mai rarrabuwa, nau'i daya;

6. Matsakaicin zafin jiki: -30 ℃ ~ 180 ℃;

7, Hanyar haɗi: Flanged.

Fasaha sigogi na zazzabi na'urar firikwensin:

1, firikwensin iri: PT1000;

2, Shigarwa hanya: kare hula;

3, zazzabi auna kewayon: -50 ℃ ~ 200 ℃;

4, waya tsawon: 0.6m ~ 15m.

6. Shigarwa Hanyar:

1, dumama tsarin ya kamata a shigar da tace a cikin hawa. Tsabtace tsarin bututun kafin dumama don hana kashe-kashe da suka fadi a lokacin shigar da bututun. Na'ura mai auna firikwensin zui ne mai kyau a tsaye shigar (ruwa yana gudana daga kasa zuwa sama), a wannan matsayi, lokacin da ruwa ba ya gudana, ruwa mai ƙarfi ya zuba, yayin da kayan man fetur ke tashi, ba za su haɗu da lantarki ba. Idan madaidaiciya shigar, dole ne *** tabbatar da cewa bututun cike da ruwa don kauce wa tasirin madaidaiciyar ma'auni ta hanyar iska;

2, bututun ciki diameter ya kamata ya kasance daidai da na'urar firikwensin ciki diameter don kauce wa shrinkage lamarin;

3, shigarwa muhalli ya kamata ya kasance nesa da karfi magnetic filin kayan aiki don hana tsoma baki. (kamar injin, mai canzawa, mai watsawa na rediyo, tafkin lantarki ko wasu wurare da ke haifar da tsangwama na lantarki);

4, electromagnetic zafi mita za a iya shigar a cikin ruwa bututun kuma za a iya shigar a cikin ruwa back bututun, da shigarwa wuri ya kamata sauki duba tebur. Na'ura mai auna firikwensin ya kamata ya kasance ba kasa da 5DN tsawon sashin kai tsaye, idan na'ura mai auna firikwensin yana da ƙofar da ba cikakke ba ko bawul mai daidaitawa, to, haɗin ƙofar bawul da tsawon sashin kai tsaye na na'ura mai auna firikwensin ya kamata ya ƙaru zuwa 10DN, tsawon sashin kai tsaye na ƙasa ba kasa da 3DN ba.

5, haɗin cable tsakanin firikwensin da mai juyawa zui tsawon ne 100;

6. Lokacin amfani da lantarki waldi, waldi kofa dole ne *** nesa da firikwensin, tsananin kare lalacewa liner saboda firikwensin overheating ko saboda waldi slag tashi;

7, zafin jiki na'urar firikwensin kebul yana da tsawon mita 4, matsayin na'urar firikwensin zafin jiki da matsayin mitar zafi ba zai iya wuce tsawon layi ba, kamar wuce yarjejeniyar samarwa;

8, electromagnetic thermal wutar lantarki bayyanar da layin ƙasa ya kamata ba kasa da 5.5mm2, da kuma gajeren kamar yadda zai yiwu, da kuma kauce wa jama'a ƙasa da sauran kayan aiki (shawarar amfani da daban-daban ƙasa).

7. Kulawa.

1, ba ma'auni lantarki shaft dole ne *** kusa da kwance shugabanci;

2, ma'auni bututun ciki dole ne *** cike da ruwa;

3, Flow ma'auni gaba bukatar da 5 * D (D ne Flow ma'auni ciki diamita) tsawon tubu sashi, baya bukatar da 3 * D (D ne Flow ma'auni ciki diamita) tsawon tubu sashi;

4, shugabancin kwararar ruwa da shugabancin kibiya na ma'aunin kwararar ruwa daidai ne;

5, a cikin bututun dole ne akwai inji zai lalata ciki liner na kwarara ma'auni, bukatar kulawa ta musamman;

6. Ya kamata babu karfi electromagnetic filin kusa da kwarara mita;

7. Ya kamata a sami isasshen sarari kusa da ma'auni don shigarwa da kulawa;

8, idan ma'aunin bututun yana da rawar jiki, a bangarorin biyu na ma'aunin kwarara ya kamata ya kasance da tsayayye tushe don auna daban-daban kafofin watsa labarai na hada ruwa lokacin da nisan tsakanin haɗuwa da ma'aunin kwarara ya kamata ya kasance aƙalla 30 × D (D ne ma'aunin kwarara ciki diamita) tsawon don sauƙaƙe tsaftacewa da kulawa na ma'aunin kwarara a nan gaba, ya kamata a shigar da


10. Zaɓin tebur