Model No.: CX-100-1 Single launi mai kofin firitin

A. Aikace-aikace:

Wannan shi ne karamin tsaye firintar da karfe farantin girma 100 * 200mm. Yana amfani da tungsten karfe man fetur zane, a lokacin buga hanya da kwata ba sauki splash, shi ne mafi muhalli tsabta idan aka kwatanta da man fetur firintar. Max buga gudun 1500 sau / h, Max buga yankin: MaxMax Max 80mm. Ya dace da buga logo a kan farfajiyar samfurin lantarki, roba gidaje, kayan aiki kayan aiki, kayan aiki, kayan aiki, kayan aiki, kyauta.

2. fasaha sigogi:

1. Single kwamfuta IC tattara aiki shirye-shirye, daban-daban buga yanayin zabi

2. Auto huɗu lambobi Counter, da kididdiga buga adadin

3.Full cast aluminum jiki, surface karfe fenti

4. Amfani da muhalli-friendly man fetur

5.Work tebur, glue shugaba, man fetur matsayi za a iya daidaita wani X.Y.Z axis

6.Independent daidaitacce matsin lamba na Ink suction & buga

7. Tare da atomatik gaba da baya sliding uniform ink aiki, hana ink na gida coagulation

8.All silinda gudun da m daidaita torque

9. Amfani da asali Japan SMC da kuma Taiwan MINDMAN pneumatic sassa

10.All daidaitawa matsayi tare da sikelin alama

11.No matsa iska shiga haramta glue kai faduwa aiki

12. Dukkanin injin aiki da sauri, m, da ƙananan amo

Zaɓin yanayin aiki: cikakken atomatik | Semi-atomatik | Manual | kai shirye-shirye

Fara hanyar: Panel | Foot canzawa

Hanyar aiki na scraper: pneumatic inji bawul tuki silinda sama da ƙasa

gaba da baya tafiya: 110mm

sama da ƙasa tafiya: 50mm

Max buga yanki: ¢ 80mm

Man fetur ring wuta diamita: ¢ 82mm

Man fetur ring wuta kayan: tungsten karfe. yumbu

Man fetur ring wuka rayuwa: sau miliyan biyu

Karfe farantin size: 100 * 200mm

Buga gudun: 1500 pcs / hr

Wutar lantarki: 220V 50-60MHZ 30W

. Air matsin lamba: 5-7bar

Maimaita daidaito <0.05MM

Buga tashar: 1 bit

Fixing hanyar: T-irin ramun tebur, matsa lambar matsa

Fittings kayan zabi: atomic toka | aluminum | lantarki katako | roba | karfe

Adhesive shugaban gyara hanya: katako dungulla kulle