■ Bayanan samfurin

1.Zaɓi4nau'in ma'auni sigogiRa、Rz、Rt、Rq；

2.Calibration samfurin ya yi amfani da gani gilashi substrate, gano da National Institute of Metering, high daidaito, ba sauki scratching, da dogon rayuwa;

3.Tare da calibration aiki, aiki mai sauki;

4.Ana amfani da shi sosai don gwajin samar da wuraren sarrafawa na karfe da non-karfe sarrafawa;

5.Yi amfani da High SpeedDSPprocessor gudanar da data sarrafawa da lissafi, da sauri, mafi daidaito;

6.Zaɓin Sample tsawon0.25 ，0.80 ，2.50；

7.MatsayiLEDLCD nuni, high haske, babu hangen nesa kusurwa, wide zafin jiki, dace da daban-daban lokuta;

8.Auto kashewa aiki da kuma low ikon software da hardware zane sa kayan aiki aiki hours super-tsawo;

9.Biyu caji hanyoyi, keɓaɓɓun caji ko kwamfutaUSBKofi caji, za a iya aiki a gefen caji, sauki da sauri;

10.Na'ura mai auna firikwensin kai yana da kariya ƙofar, inganci kare na'ura mai auna firikwensin kai, tabbatar da daidaito na ma'auni;

11.Tsarin ya yi amfani da zane na aluminum mold, yana da ƙarfi da ƙarfi, yana da ƙarfin tsangwama na lantarki, ya dace da sabon yanayin zane na yau.

■ fasaha sigogi

1.auna sigogi (μm）:Ra、Rz、Rq、Rt
2.auna kewayon (μm）:Ra、Rq：0.05 ~ 10.0; Rz、Rt：0.1 ~ 50
3.Sample tsawon (mm）:0.25， 0.80 ， 2.50
4.Rate tsawon (mm）:1.25， 4.0 ， 5.0
5.Tsawon tafiya (mm）:6
6.Daidaito na ƙimar:0.01
7.Kuskuren ƙima:±（7-10）%
8.Canjin ƙimar:＜12%
9.Na'urar firikwensin tagi allura tip arc radius da kuma kusurwa:Kula tip arc radius:10 μm±1
10.μmSensor tackle static ƙarfi da kuma su canji rate:Tafa static ƙarfi:≤ 0.016N
11.Measuring Canji Rate:≤ 800N/m
12.Sensor shugaban matsin lamba:≤ 0.5NBaturi
13.:3.7VLithium-ion baturi
14.girman:106 mm×70 mm×24 mm
15.nauyi:200gYanayin aiki-20:40zazzabi:℃～℃, dangi zafi:

< 90%

1.Babu rawar jiki, babu lalata kafofin watsa labarai1■ Cikakken kayan aiki

2.roughness ma'auni:1mutum

3.Multi-notch daidaitawa samfurin:1mutum

4.Gidajen:1mutum

5.caji:1Blocks

6.Layin bayanai:1tushe

7.Bayani:1rabo

8.takardar shaida:1rabo