Jamus Coates TP218jerin
Biyu ruwa al'ada zazzabi Multi-aiki bushewa iri

Abubuwan:
TP218 jerin ink sauri bushewa, surface smooth da haske, murfin ƙarfi opaque.

Aikace-aikace:
Filaski mai zafi, gilashi, fenti da kuma fuskar rufi mai haɗuwa, fata da fata mai ƙarya, ƙarfe, nylon, Cellulose acetate, Polyacetal da aka yi amfani da shi, PE da PP da aka yi amfani da su, Tetrolone da polypropylene.

Abubuwan da suka dace:

TP218 jerin amfani da biyu ruwa ink tare da TP219 hardener. Amfani da ƙara hardener ba kawai yana da kyakkyawan kayan aikin inji na motsa jiki ba, har ma yana tsayayya da nau'ikan kayan kwayoyin halitta, sinadarai, daidaito da acid, man fetur da mai. Ba tare da nauyi karfe pigment precipitation, wuce EU kayan wasa misali EN71, sashi na 3, takwas manyan nauyi karfe narkewa abun ciki gwaji.

bushewa lokaci:
a dakin zafin jiki (20-25 ℃); A cikin yanayin 68-77 ° F), lokacin bushewa na yatsa shine kimanin mintuna 10-15.
Idan ya yi gashi, yana ɗaukar minti ɗaya kawai don bushewa. Cikakken karawa yana ɗaukar kwanaki 5-6 don samar da juriya ta inji da sinadarai.

Mixed rabo:
TP218 jerin tawara da TP219 hardener da kuma hada rabo ne: tawara: hardener (nauyi rabo) = 4: 1.
Don daidaita watara mai ƙarfin launi, rabo na haɗuwa shine: watara: karfafa (nauyi) = 5: 1.

Taimakon Musamman:
∝ADDITIVE A: diluent, amfani da 15-30%
∝Mai bushewa: TPD
★ Rashin daidai ko oversized amfani da taimako zai shafi ink aiki, don haka lura a lokacin amfani.

Lura:
Bayan TP218 haɗuwa hardener iya amfani da lokaci iyaka ne 8 hours, bayan amfani da cibiyar sadarwa, karfe farantin da kuma m kayan aiki ya kamata a wanke nan da nan ta amfani da narkewa.
tsaftacewa:Da fatan za a yi amfani da VD40 diluent don wanke ta hanyar yau da kullun spray.